Carrito
0
Convertidor/repetdor de RS-232 a RS-422/485
TCC-120
Convertidor/repetdor de RS-232 a RS-422/485
Moxa's serial-to-serial media converters can convert between RS-232, RS-422, and RS-485, which avoids compatibility issues that are often encountered when communicating between different serial interfaces.
Ficha de datos
- Serial Standards
- RS-422, RS-485
- No. of Ports
- 2
- Baudrate
- 50 bps to 921.6 kbps (supports non-standard baudrates)
- RS-485-2w
- Data+, Data-, GND
- Power Connector
- Terminal block (for DC models)
- No. of Power Inputs
- 1
- Input Voltage
- 12 to 48 VDC
- Power Consumption
- 65 mA @ 12 VDC
- Dimensions
- 67 x 100.4 x 22 mm (2.64 x 3.93 x 0.87 in)
- Weight
- 148 g (0.33 lb)
- Installation
- DIN-rail mounting (with optional kit), Wall mounting
- Housing
- Metal
- Operating Temperature
- -20 to 60°C (-4 to 140°F)
- Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity
- 5 to 95% (non-condensing)
- EMC
- EN 55032/24
- Safety
- EN 60950-1, IEC 60950-1
- EMI
- CISPR 32, FCC Part 15B Class A
- EMS
- IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV IEC 61000-4-5 Surge: Power: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 PFMF
- Vibration
- IEC 60068-2-6
- Time
- 1,949,025 hrs
- Standards
- Telcordia (Bellcore), GB
- Warranty Period
- 5 years
- Connector
- Terminal block
- Input Current
- 65 mA @ 12 VDC
- Overload Current Protection
- Supported
- IP Rating
- IP30
- RS-422
- Tx+, Tx-, Rx+, Rx-, GND
- RS-485-4w
- Tx+, Tx-, Rx+, Rx-, GND
- Pull High/Low Resistor for RS-485
- 1 kilo-ohm, 150 kilo-ohms
- RS-485 Data Direction Control
- ADDC® (automatic data direction control)
- Terminator for RS-485
- N/A, 120 ohms, 120 kilo-ohms
- Environmental Testing
- IEC 60068-2-1 IEC 60068-2-2 IEC 60068-2-3
No hay ninguna opinión por el momento.